Detailed Description:

Two Serial ATA SATA to IDE Ultra ATA-100/133 Mini Converters

These SATA-to-Ultra ATA-133 converter boards provide converter solutions for Parallel Ultra ATA Devices. They have a standard 40 pin ATA port that can interface to parallel Ultra ATA (IDE) devices (hard disk, CDROM, etc). They accept SATA commands through the Serial ATA interface from the host, decode the commands and convert them to parallel ATA commands to the device. Response from the device through the parallel ATA bus are deciphered, processed and converted to SATA protocol and sent to the host.

This SATA-to-Ultra ATA-133 Converter The adapters supports the Serial ATA Generation 1 transfer rate of 1.5 Gb/s (150 MB/s) on the serial side and is compatible with Ultra ATA-133 on the parallel ATA side.

ALL EIDE Type DVD / DVD-RAM / CD-ROM / CD-RW / HDD Become New Serial ATA Devices!

Attach these mini converter boards to back of all types of ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE storage devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, MO, ?) and make them become new Serial ATA Devices which meet new Serial ATA standards.

These dangle boards can support HDD larger than 137GB.

The standard 40 pin ATA port can interface to a parallel Ultra ATA devices. It accepts SATA commands through the Serial ATA interface from the host, decodes the commands and converts them to parallel ATA commands to the device. Response from the device through the parallel ATA bus are deciphered, processed and converted to SATA protocol and sent to the host.

All Your Old DVD / DVD-RAM / CD-ROM / CD-RW / HDDs Become New Serial ATA Devices and Meet New Serial ATA Standard.

This pair of adapters was used for less than a year on a RAID network server and provided invisible data conversions. One of the adapters has a very slight chip in the cover, but the chip is merely cosmetic.

Package Contents

SATA to IDE Converter x 1 (Brand New in Retail Package)
Serial ATA Cable x 1
4PIN Power Cable x 1